Control your pergola away from home
Operate your pergola when both your phone and KumandaLink have internet access. Your phone can use mobile data or internet-connected Wi-Fi.
PHONE CONTROL FOR YOUR PERGOLA
Add phone control to your existing pergola.
Open, stop and close a compatible pergola through the KumandaLink app. Control it over the internet while away from your terrace and see open/closed status with an additional status sensor. Your existing handheld remote stays available.
Use-case illustration
Phone control1 / 5 / 15
KumandaLink is a device that adds phone control to a compatible existing pergola. Connect it to power and pair it using your working remote. Our Android or iPhone app lets you send open, stop and close commands. An additional status sensor is required to see the pergola’s open/closed status. Compatibility is checked by remote and receiver model.
Schedule your terrace routine
Plan recurring pergola opening and closing commands for your chosen times. Adjust the schedule in the app when your routine changes.
Manage your terrace systems together
Add compatible pergolas, zip screens and glass systems to separate channels. Group selected systems when you want to send them commands together.
EXAMPLE CHANNEL PLAN
Example: one independently controlled pergola
One independent pergola uses one channel for opening, stopping and closing. The 1 Channel model fits this example once compatibility and wireless coverage are confirmed.
This is an illustrative setup. Model compatibility and wireless coverage are checked separately.
How do the remote and phone work together?
The app cannot connect to your pergola on its own. A KumandaLink device adds phone control to compatible systems, using your working remote for initial pairing.
- Photograph the front and back of your remote.
- Include a visible receiver label if available.
- Tell us how many pergolas operate independently.
Understand control at home and away
Control away from home requires internet access on both your phone and KumandaLink. Your phone can use mobile data. Local control works without internet when both devices share the same working Wi-Fi network.
Pairings and settings are retained after a power interruption. Device placement must also suit the wireless coverage of your systems.
01Can I add phone control to the pergola I already have?
Yes, if its remote and receiver models are compatible. KumandaLink is paired using your working remote. Send clear remote photos so we can check your model before purchase.
02What if I have lost my remote?
Initial pairing uses a working remote. Contact LiyaTech support before choosing a model if yours is missing or faulty.
03How can I check a bioclimatic or retractable roof system?
The name bioclimatic or rolling roof does not establish compatibility. Share photos of the working remote and any externally visible receiver label so we can check the model and supported commands. The additional status sensor reports open/closed status only; it does not measure slat angles or opening percentage.
04How many channels do two pergolas need?
Two independently controlled compatible pergolas use two channels. The 5 Channel model would leave three channels available.
05Can I control the pergola if the internet goes down?
Local control works when your phone and KumandaLink share the same working Wi-Fi network. Your handheld remote also stays active. Control away from home requires internet access on both devices.
06Can I control my pergola over mobile data away from home?
Yes. Both your phone and KumandaLink must have internet access. Your phone can use mobile data or an internet-connected Wi-Fi network to control your compatible pergola.
07Can I check whether the pergola is actually open or closed?
Yes, with an additional open/closed status sensor. Each independent pergola you want to monitor requires one sensor. The sensor does not measure intermediate positions or opening percentage.
START WITH THE RIGHT MODEL
Check compatibility