Manage each side separately
Send a command to a front-facing screen while leaving side screens as they are. Select each independent screen through its own channel.
PHONE CONTROL FOR ZIP SCREENS
Control your zip screens from your phone.
Open, stop and close compatible motorised zip screens through the KumandaLink app. Control each side of your terrace separately or group screens you use together. Your existing zip screen remote stays available.
Use-case illustration
Phone control1 / 5 / 15
Phone control for a zip screen uses the KumandaLink device and app with a compatible existing remote and receiver. Connect the device to power and pair it using your working remote. Each independent zip screen uses one channel. Send supported open, stop and close commands, create groups and schedule commands. Open/closed status requires one additional status sensor for each screen you want to monitor.
Group the pergola and zip screens
Add a compatible pergola and zip screens to separate channels on the same device. Group the systems you want to operate together.
Control while away from the terrace
Use mobile data when both your phone and KumandaLink have internet access. Local control also works without internet on the same working Wi-Fi network.
EXAMPLE CHANNEL PLAN
Example: one pergola and three zip screens
One pergola and three independently controlled zip screens use four channels, leaving one available on the 5 Channel model. All models and wireless coverage must be checked.
This is an illustrative setup. Model compatibility and wireless coverage are checked separately.
Pergola1 channel
Independent motorised zip screen3 channels
Total4 channels
KumandaLink 5 Channel
Explore this modelUse the zip screen remote and app together
We check the controls on your existing motorised zip screen, also described as an exterior zip blind. The screen type or motor brand alone does not establish compatibility; the remote and receiver models are checked together.
Your handheld remote remains available after setup. You can also send supported commands from the free app and web panel.
Count independently controlled screens
Channel requirements do not depend on the number of remote buttons or the width of the fabric. Plan one channel for each screen you want to operate independently. Share the existing control arrangement so we can confirm the count.
- Share front and back photos of your remote.
- Include an externally visible receiver label if available.
- Tell us the number of independent screens and other systems you want to control.
01Can I control a zip screen from my phone?
Yes, if the existing remote and receiver models are compatible with KumandaLink. Once checked, the device is paired using your working zip screen remote.
02Is downloading a zip screen app enough?
No. The KumandaLink device and app work together. The device connects phone control to your compatible existing remote-controlled system.
03Which model fits three separate zip screens?
Three independent screens use three channels. The 5 Channel model fits once model compatibility and wireless coverage are confirmed, leaving two channels available.
04Can I manage the pergola and zip screens in one app?
Yes, if each system is compatible. One pergola and three independent zip screens use four channels. You can group selected systems as well as control them separately.
05Can I see whether the zip screens are open or closed?
Each independent screen you want to monitor needs one additional open/closed status sensor. Monitoring three screens requires three sensors. The sensor does not measure intermediate positions or opening percentage.
06Can I use phone control without internet?
Yes, when your phone and KumandaLink share the same working local Wi-Fi network. Control away from home over mobile data requires internet access on both your phone and KumandaLink.
START WITH THE RIGHT MODEL
Check compatibility